There' s No CD, So How Do I Install Dlink Router Dir-655?

D-Link is a well-renowned and famous brand in the field of networking-based electronic device manufacturers. They produce all kinds of wired & wireless routers, modems, wifi extenders, antennas, etc Install Dlink Router Dir-655

Among all these devices, routers are the most popular ones. People buy these router machines to get access to high-speed internet and share the same with multiple other devices using these routers.

Although these networking products have made significant in our daily lives, their complexity cannot be denied. These machines are made up of a different set of hardware, modems, antennas, and software program to control different functionalities. We at Technical Service for D-Link receive hundreds of calls on a daily basis from users complaining about the issues they might have.

Among all these queries which really had the majority of the public in tangles was about setting up the d link dir 655 setup without the CD. In this article, I will discuss a detailed stepwise configuration setup. Kindly go through it to do it yourself.

 Step to Configure D-Link DIR-655 Router Without the CD

Router configuration is a meticulous task, where you need to set up the router as per your needs and requirements. You generally get a CD along with your router for the configuration process. This CD is required, to install the drivers and updates for your router.

In case you have misplaced or lost the CD, then also no need to worry as the configuration is easy even without the CD.

Kindly, Go Through the Process Mentioned Below to D-Link Dir-655 Setup.

Step 1: Connect your router to your computer using an ethernet cable, one end of the cable goes inside the LAN port of your D-Link router while the other goes inside the Ethernet port on your computer.

Now, the ADSL cable from your ISP will be inserted into the WAN port of your router. Wait for a few minutes to let the connection between the two devices get established.

Step 2: Open, your web browser and type in your IP address in the given URL field and hit enter to get to your router’s login portal.

Step 3: log in to your router with the SSID and Password provided by your ISP, if your ISP did not provide you with any such credentials, enter ’admin’ in the SSID field and leave the password field blank.

Step 4: Now you will be redirected to the main settings page from where you will configure your router. Open the WAN settings tab, and enable DHCP on your router. This will help your router to get an automatic IP address from the server, instead, you change it every now and then. Also, check the box for PPPoE settings.

Step 5: Once the WAN settings have been configured, save the settings and go to the main page. From here, click on security settings. On the security tab, change your encryption type to WPA2 and just below that you will notice a box for ‘pass-key’, this is your wifi password.

Change it and create your own password which should be strong enough and cannot be easily guessed.

Step 6: Save the settings and you have successfully configured your router without the CD. Now, in order to download the software programs, and drivers for your router, head over to the official vendor website of your router and search for your device.

Once you find your device, go to its respective download section and download all available router drivers and firmware. Install them one by one and your router is ready to use.

This is how you configure your D-Link router without the need for a CD. Hopefully, these steps helped you in resolving your problem.